Archive for the ‘Mills’ Category

104028 – Southwestern Industries LPM (2010)

| Wednesday, April 10th, 2019 | No Comments »

Video: https://youtu.be/Y9Myuc_T0DA Specifications: Table size: 35 3/8″ X 19 5/8″ Tee slots (no. x width x pitch): 5 x .71″ x 3.94″ Table max load: 1000 lbs. Travels (X x Y x Z):  31″ x 18.5″ x 21″ Max spindle nose to table: 24″ Min spindle nose to table: 3 3/8″ Max clearance spindle center to column: 19 1/4″ Max

104017 – Southwestern Industries FHM 5 (2008)

| Tuesday, March 19th, 2019 | No Comments »

Specifications:  Table size – 50″ x 12″ T-slots (number x width x pitch) – 3 x16mm x 63.5mm Travel (X, Y, Z axis) – 40″ x 20″ x 24″ Quill diameter – 4.13″ Spindle taper – NMTB 40 Spindle speed range RPM – 160-4000 Spindle center to column face – 20.5″ Spindle motor power – 5 HP Power requirement, control

Southwestern Industries Trak DPM – WANTED -WE BUY PROTOTRAK MILLS AND LATHES

| Tuesday, March 19th, 2019 | No Comments »

Southwestern Industries Trak DPM – WANTED -WE BUY PROTOTRAK MILLS AND LATHES   Southwestern Industries Prototrak, TRAK, K2, K3, K4, DPM SX2, DPM, DPM3, DPM V3, DPM SX3, DPM RX3, DPM5, DPM V5, DPM SX5, DPM RX5, FHM5, V7, FHM7, 2 OP, LPM, 1440, 1540, 1630, 1745, 1840, 1845, 2460, 2470, AGE III Control, VL Control, VM Control, SM Control,

103967 – Southwestern Industries FHM 5 (2007)

| Tuesday, November 6th, 2018 | No Comments »

Specifications:  Table size – 50″ x 12″ T-slots (number x width x pitch) – 3 x16mm x 63.5mm Travel (X, Y, Z axis) – 40″ x 20″ x 24″ Quill diameter – 4.13″ Spindle taper – NMTB 40 Spindle speed range RPM – 160-4000 Spindle center to column face – 20.5″ Spindle motor power – 5 HP Power requirement, control

Page 2 of 2«12