SPECIFICATIONS: DISTANCE BETWEEN CENTERS………… 40 1/4″SWING OVER BED…………………………….. 18 1/2″SWING OVER SADDLE WINGS…………… 17″SWING OVER CROSS SLIDE……………….  9″CROSS SLIDE TRAVEL………………………. 13″SPINDLE NOSE…………………………………. D1-6SPINDLE THOUGH HOLE………………….. 2.36″SPINDLE TAPER……………………………….. MT #6SPINDLE SPEED……………………………….. 80-2500 RPMSPINDLE MOTOR……………………………… 10 HPTAILSTOCK QUILL DIAMETER………….. 2.96″TAILSTOCK QUILL STROKE/CENTER…. MT#5RAPID FEED RATES(X)…………………………….. 75 (MAX (Z)…………………………….. 150 (MAX)DIMENSIONS………………………………………. 91″L x 53″W x70″H MACHINE WEIGHT………………………………. 4,500 LBS EQUIPPED WITH:PROTOTRAK SLX CNC CONTROLS4 POSITION

Machine Specifications Height of Centers-7” Distance between centers-40” Swing over bed -14” Swing over saddle wings-14” Swing over cross slide-7.0” Cross slide travel-8.0” Tool section max-3/4” Coolant tank capacity – 3 gal. Width of Bed-8.1” Height of Bed-10.6” Spindle Nose (Camlock)-D1-4 Spindle through hole-1.575” Spindle taper-MT#5 Taper in reduction sleeve-3 Spindle dia at front bearing-2.36” Number of bearings-2 Spindle speed

Specifications: Swing Over Bed…………………..24″Distance Between Centers………….60″Cross slide travel……………….12.5″Spindle Speed RPM………………..40-670, 100-1800Spindle Motor……………………15 HPSpindle Through Hole……………..4.09″ Dimensions………………………112″x52″x62″Net Weight………………………7300 lbs. Equipped With:TRAK VL CNC Control Dorian Indexer 

Specifications:Swing over bed: 24″ Swing over cross slide: 14.5″ Distance between centers: 60″ Spindle bore: 4.09″ Spindle speeds (2 range): 40 – 1800 RPM Spindle motor: 15 HP Spindle nose: D1-8 Machine dimensions: 115″L x 60″W x 77″H Machine weight: 8000 lbs Equipped with:   Prototrak SLX CNC Control   Advanced FeaturesNetworking Traking 

Machine Specifications Height of Centers – 9” Distance between centers – 40 1/4″ Swing over bed -18  1 / 2” Swing over saddle wings -17” Swing over cross Slide – 9” Cross slide travel – 13” Tool section max – 1” Coolant tank capacity – 13 gal. Width of Bed – 14  1/ 2” Height of Bed – 13  3

Specifications: Height of Centers………………………8″Distance between centers………………..30″Swing over bed…………………………16″Swing over saddle wings…………………16″Swing over cross slide………………….8.6″Cross slide travel……………………..8.5″Tool section max……………………….3 /4″Coolant tank capacity…………………..9.3 gal.Width of Bed…………………………..12.6″Height of Bed………………………….12.6″Spindle Nose (Camlock)………………….D1-6Spindle through hole……………………2.12″Spindle taper………………………….MT#6Taper in reduction sleeve……………….N/ASpindle dia at front bearing…………….3.15″Number of bearings……………………..2Bearing class (radial round)…………….P5Spindle speed range (RPM)……………….150-2500Optional Tailstock Quill travel………….6.3″  – Quill diameter……………………..2.36″  – Quill taper hole……………………MT#4Spindle Motor HP……………………….7.5Power requirements, control……………..110V;

Southwestern Industries Trak DPM – WANTED -WE BUY PROTOTRAK MILLS AND LATHES   Southwestern Industries Prototrak, TRAK, K2, K3, K4, DPM SX2, DPM, DPM3, DPM V3, DPM SX3, DPM RX3, DPM5, DPM V5, DPM SX5, DPM RX5, FHM5, V7, FHM7, 2 OP, LPM, 1440, 1540, 1630, 1745, 1840, 1845, 2460, 2470, AGE III Control, VL Control, VM Control, SM Control,