Author Archive

104119 – Southwestern Industries Trak LPM Vertical Machining Center (2015)

| Tuesday, November 26th, 2019 | No Comments »

SPECIFICATIONS:Table size:…………………………………………… 35 3/8″ X 19 5/8″Tee slots: no. x width x pitch:…………………… 5 x .71″ x 3.94″Table max load:……………………………………. 1000 lbs.Travels: X x Y x Z:………………………………… 31″ x 18.5″ x 21″Max spindle nose to table:………………………… 24″Min spindle nose to table:…………………………. 3 3/8″Max clearance spindle center to column:………. 19 1/4″Max Rapid speed……………………………………. X x Y x Z ipm 800 x

104109 – Southwestern Industries Trak TRL 1840SX (2011)

| Tuesday, October 29th, 2019 | No Comments »

SPECIFICATIONS: DISTANCE BETWEEN CENTERS………… 40 1/4″SWING OVER BED…………………………….. 18 1/2″SWING OVER SADDLE WINGS…………… 17″SWING OVER CROSS SLIDE……………….  9″CROSS SLIDE TRAVEL………………………. 13″SPINDLE NOSE…………………………………. D1-6SPINDLE THOUGH HOLE………………….. 2.36″SPINDLE TAPER……………………………….. MT #6SPINDLE SPEED……………………………….. 80-2500 RPMSPINDLE MOTOR……………………………… 10 HPTAILSTOCK QUILL DIAMETER………….. 2.96″TAILSTOCK QUILL STROKE/CENTER…. MT#5RAPID FEED RATES(X)…………………………….. 75 (MAX (Z)…………………………….. 150 (MAX)DIMENSIONS………………………………………. 91″L x 53″W x70″H MACHINE WEIGHT………………………………. 4,500 LBS EQUIPPED WITH:PROTOTRAK SLX CNC CONTROLS4 POSITION

104108 – Southwestern Industries Trak TRL 1440 ELX (2011)

| Tuesday, October 29th, 2019 | No Comments »

Machine Specifications Height of Centers-7” Distance between centers-40” Swing over bed -14” Swing over saddle wings-14” Swing over cross slide-7.0” Cross slide travel-8.0” Tool section max-3/4” Coolant tank capacity – 3 gal. Width of Bed-8.1” Height of Bed-10.6” Spindle Nose (Camlock)-D1-4 Spindle through hole-1.575” Spindle taper-MT#5 Taper in reduction sleeve-3 Spindle dia at front bearing-2.36” Number of bearings-2 Spindle speed

104107 – Southwestern Industries DPM SX3P, (2013)

| Tuesday, October 29th, 2019 | No Comments »

Specifications: Table size                                      50″ x 10″ T-Slots                                           3 .63″ x 2.48″Travel (X, Y, Z)                             30″ x 17″ x 23.5″Maximum quill travel                    5Quill diameter                                3 15/16″Spindle taper                                  # 40Spindle speed range                       70 to 5000 rpmSpindle center to column face        19″Spindle motor                                 5 HPPower requirement Control           

104105 – Southwestern Industries Trak TRL 2460 VL

| Tuesday, October 29th, 2019 | No Comments »

Specifications: Swing Over Bed…………………..24″Distance Between Centers………….60″Cross slide travel……………….12.5″Spindle Speed RPM………………..40-670, 100-1800Spindle Motor……………………15 HPSpindle Through Hole……………..4.09″ Dimensions………………………112″x52″x62″Net Weight………………………7300 lbs. Equipped With:TRAK VL CNC Control Dorian Indexer 

104102 – Southwestern Industries DPM SX2P (2011)

| Tuesday, October 29th, 2019 | No Comments »

Specifications  Table Size – 49” x 9”  T-Slots (number x width x pitch) – 3 x .63” x 2.5”  Travel (X, Y, Z axis) – 32 x 16 x 27  Quill Diameter – 3 3/8”  Maximum Quill Travel – 5”  Spindle Taper – R8  Spindle Speed Range – 40-600, 300-5000  Spindle Center to Column Face – 18”  Spindle Motor Power – 3 HP  Power requirements, control – 110V; 1P; 10A  Power

104101 – Southwestern Industries DPM SX2 (2010)

| Tuesday, October 29th, 2019 | No Comments »

Specifications: Table Size:  49″ x 9″X-Axis:  32″Y-Axis:  16″Z-Axis:  27Quill Diameter:  3 3/8″Maximum Quill Travel:  5″Spindle Taper:  R8Spindle Speed Range RPM – Varispeed Drive: 70 – 4200 RPMSpindle Center to Column Face:  18″Spindle Motor Power – vari-speed head:  3 HPMaximum Weight of Workpiece:  1,320 lbs.Height of table from bottom of bed:  33″Max spindle nose to table:  27″Min height:  90″Max height:  98″Width of

104100 – Southwestern Industries DPM SX2 (2006)

| Tuesday, October 29th, 2019 | No Comments »

Specifications:Table Size………………………………………49″ x 9″X-Axis………………………………………….32Y-Axis………………………………………….16Z-Axis………………………………………….27Quill Diameter…………………………………..3 3/8″Maximum Quill Travel……………………………..5″Spindle Taper……………………………………R8Spindle Speed Range RPM – Varispeed DriveSpindle Center to Column Face……………………..18″Spindle Motor Power – vari-speed head………………3 HPMaximum Weight of Workpiece……………………….1,320 lbs.Height of table from bottom of bed…………………33″Max spindle nose to table…………………………27″Min height………………………………………90″Max height………………………………………98″Width of machine including table…………………..70″Length with electric box door closed……………….64″Overall width incl full table traverse……………..104″Overall length with electrical door open……………72″Footprint

104091 – Southwestern Industries TRL 2460SX (2007)

| Tuesday, October 29th, 2019 | No Comments »

Specifications:Swing over bed: 24″ Swing over cross slide: 14.5″ Distance between centers: 60″ Spindle bore: 4.09″ Spindle speeds (2 range): 40 – 1800 RPM Spindle motor: 15 HP Spindle nose: D1-8 Machine dimensions: 115″L x 60″W x 77″H Machine weight: 8000 lbs Equipped with:   Prototrak SLX CNC Control   Advanced FeaturesNetworking Traking 

104080 – Southwestern Industries TRL 1840 SX (2005)

| Thursday, August 22nd, 2019 | No Comments »

Machine Specifications Height of Centers – 9” Distance between centers – 40 1/4″ Swing over bed -18  1 / 2” Swing over saddle wings -17” Swing over cross Slide – 9” Cross slide travel – 13” Tool section max – 1” Coolant tank capacity – 13 gal. Width of Bed – 14  1/ 2” Height of Bed – 13  3

Page 1 of 212»